This Micro Matic secondary CO2 regulator reduces an existing regulated gas supply to the serving pressure required by one beer keg. It provides a separate adjustment for that keg line, so you do not have to change the primary regulator's setting to lower its pressure.
The single gauge displays outlet pressure at the regulator. A chrome-plated forged brass body and nickel-plated valve seats form part of the Premium Plus construction. The pressure relief valve vents excess gas at 55-65 PSI, and the adjustment screw and bonnet are designed to show signs of tampering.
Features and Specifications
- Brand: Micro Matic
- Series: Premium Plus
- Regulator type: Secondary CO2 regulator
- Configuration: One pressure adjustment for one keg line
- Pressure adjustment range: 0-60 PSI
- Gauge: One outlet-pressure gauge
- Body: Chrome-plated forged brass
- Valve seats: Nickel-plated
- Pressure relief valve: Releases excess gas at 55-65 PSI
- Adjustment: Screw and bonnet designed to show signs of tampering
- Factory leak testing: Tested at 145 PSI
- Connection options: Plug-Barb or Barb-Barb
- Barb sizes: 5/16 inch or 3/8 inch
Connection Options
Plug-Barb has a plugged end; Barb-Barb has a hose barb at each end for an inline gas supply connection. Both configurations provide one regulated keg pressure. The additional barb does not create a second independent pressure setting.
Choose 5/16 inch or 3/8 inch barbs to match your gas tubing's inside diameter. For a replacement regulator, compare the existing connection arrangement before selecting your options.
NOTE: Supply this secondary regulator with reduced-pressure gas from a compatible primary gas regulator or gas blender. It cannot raise pressure above the incoming supply and must not connect directly to a high-pressure gas tank. The 145 PSI factory leak test is not an operating pressure rating.
For separate pressure control on more than one keg, see BeverageCraft's secondary gas regulators with multiple regulator bodies.
BeverageCraft ships this Micro Matic single-gauge secondary regulator across Canada and the USA. For help matching an existing installation, send your tubing size and fitting requirements to sales@beveragecraft.com.
