Taped Jacket Trunk Line - 8 Product / 2 Glycol - BevEx - Ships from Canada

1917
Was:
$10.49 10.49
SKU:
TRT1448
Minimum Purchase:
10 feet
Shipping:
Calculated at Checkout
Available In:
Canada
Product Lines:
8
Inside Diameter:
3/8
Inside Diameter:
5/16
Type:
Taped Jacket

icon-pdf.png Specifications (TRT1448)

icon-pdf.png Specifications (TRT1443)

The taped jacket 8-product beer trunk line connects an eight-product beverage selection to a remote dispensing system. Built for commercial beer and soft drink installations, it contains eight PE Ultra polyethylene beverage tubes and two glycol circulation tubes inside an insulated bundle.

Two beverage tubing sizes are available: 5/16" or 3/8" I.D. Both versions use 3/8" I.D. polyethylene (PE) glycol tubes to circulate coolant beside the product lines, helping control heat gain between the cooling equipment and the taps.

Built for Multi-Product Draft Systems

An eight-product installation needs clear line identification as well as cooling. Each beverage tube has a colour stripe and numbered marking, allowing technicians to trace the connection for a particular keg, faucet or cleaning circuit without confusing it with another product.

The glycol tubes have their own identification: blue for supply and red for return. Together, they carry chilled coolant through the bundle and return it to the power pack, where the absorbed heat is removed before the next circulation cycle.

Insulation and Taped Jacket

The tubing assembly is wrapped in polythene film and aluminized polypropylene film, then enclosed in 3/4" (19 mm) insulation. A black PVC tape jacket forms the outer covering and protects the insulation during handling and installation.

Plan the route with enough clearance for the bundle and its bends. Secure it without flattening the insulation, and insulate and seal the end connections so cooling continues through the transition to the dispensing equipment.

Key Benefits

  • Eight individual product circuits: Support a varied beverage selection through one insulated trunk line.
  • Choice of two tubing diameters: Match 5/16" or 3/8" I.D. beverage tubes to the system’s flow and pressure requirements.
  • PE Ultra beverage tubes: Provide dedicated paths for beer and soft drink dispensing.
  • Separate glycol supply and return: Circulate chilled coolant alongside all eight beverage lines.
  • 19 mm insulation: Slows heat transfer from the surrounding air.
  • Numbered, colour-striped product lines: Help technicians locate the correct tube for connection, cleaning and service.
  • Black PVC tape covering: Protects the insulated assembly along the installation route.

Specifications

  • Product lines: 8
  • Product tubing type: PE Ultra
  • Product tubing material: Polyethylene (PE)
  • Product tubing size options: 5/16" I.D. × 7/16" O.D. (7.95 × 11.1 mm), or 3/8" I.D. × 1/2" O.D. (9.5 × 12.7 mm)
  • Glycol lines: 2, consisting of one supply and one return line
  • Glycol tubing material: Polyethylene (PE)
  • Glycol tubing inside diameter: 3/8" (9.5 mm)
  • Glycol tubing outside diameter: 1/2" (12.7 mm)
  • Glycol line identification: Blue supply and red return
  • Insulation thickness: 3/4" (19 mm)
  • Internal wrap: Polythene film and aluminized polypropylene film
  • Outer jacket: Black PVC tape
  • Diameter of tubing cluster and insulation: 80–85 mm
  • Weight per foot: 0.21 kg for the 5/16" version; 0.22 kg for the 3/8" version
  • Product line identification: Colour stripes and numbers 1–8
  • Brand: UBC Group
  • Application: Commercial glycol-cooled beer and soft drink dispensing systems

Selecting the Right Trunk Line

Choose the beverage tubing size as part of the complete dispensing design. The two diameters create different flow resistance, so account for run length, vertical lift, beverage type, operating pressure and the required flow rate before ordering. Glycol tubing dimensions are the same in both versions.

Estimate the installation’s cooling requirements with our glycol chiller sizing calculator, then browse our glycol chillers for cooling equipment. Other beer trunk lines are available if your system needs a different product count or tubing configuration.

For soda installations, explore our beverage system parts for connection components and our carbonators and fountain dispensers when selecting the remaining equipment.

Important Note for US Customers Ordering Trunk Line Shipped from Canada

Trunk lines longer than 20-30 ft may require palletized shipping. Longer cuts of thinner trunk line may fit in standard boxes, but this depends on the trunk line diameter and finished coil size.

For shipments requiring customs clearance, the carrier or customs broker may request a business tax ID number. If your importer information is not already on file, you may also be asked to provide a CBP Form 5106 and supporting identification.

Please note: this trunk line is sold by the foot, with a 10-ft minimum purchase (1 ft = 0.3048 m). It is cut to order and non-returnable. Select the required beverage tubing diameter and enter the total length in feet when ordering.

For help selecting your trunk line or requesting a shipping quote, email our team at sales@beveragecraft.com with your required tubing size, length and full shipping address. Ships from Canada.