The Duoflex 8-product beer trunk line combines barrier beverage tubing with glycol circulation for remote beer, wine and soft drink dispensing. Its eight two-layer nylon product tubes are available with either a 5/16" or 3/8" inside diameter, giving installers a choice of tubing sizes for the planned flow and pressure requirements.
Duoflex barrier tubing helps limit gas permeation through the beverage tube walls. The smooth bore also helps reduce the adhesion of bacteria and yeast and limit deposit buildup during use. Two polyethylene (PE) glycol tubes run through the insulated assembly to help maintain beverage temperature on the way to the dispensing point.
Built for Multi-Product Draft Systems
This configuration gives an eight-product menu eight separate beverage paths within a single trunk line. It suits bars, restaurants and taprooms where the drinks must travel from remote storage or cooling equipment to the serving area.
Product tubes carry colour stripes and identification markings so technicians can follow individual lines when setting up connections or servicing the system. The glycol circuit is identified independently, with a blue supply tube and a red return tube connecting the power pack to the cooling route.
Insulation and Taped Jacket
A 3/4" (19 mm) insulation layer surrounds the wrapped tubing assembly and helps slow heat gain from the surrounding space. Inside the insulation, polythene film and aluminized polypropylene film enclose the tubes. Black PVC tape forms the protective outer jacket.
Leave sufficient clearance for routing and supports, particularly where the bundle changes direction. Avoid tight bends, crushed insulation and kinked tubing. Insulate and seal exposed end sections and connections to help control condensation and maintain cooling through the complete installation.
Key Benefits
- Duoflex barrier tubing: Helps limit gas permeation through the beverage tube walls.
- Eight separate product lines: Accommodate a varied beer, wine or soft drink selection.
- Smooth beverage tube bore: Helps limit deposit buildup alongside regular cleaning.
- Two product tubing sizes: Offer a choice of 5/16" or 3/8" I.D. for the dispensing design.
- Integrated glycol supply and return: Keep coolant circulating beside the beverage tubes.
- 19 mm insulation: Helps reduce heat gain outside refrigerated areas.
- Identified product circuits: Colour stripes and markings make lines easier to trace.
- Taped PVC exterior: Covers and protects the insulated bundle.
Specifications
- Product lines: 8
- Product tubing type: Duoflex multilayer barrier tubing
- Product tubing material: Two-layer nylon
- Product tubing size options: 5/16" I.D. × 7/16" O.D. (7.95 × 11.1 mm), or 3/8" I.D. × 1/2" O.D. (9.5 × 12.7 mm)
- Glycol lines: 2, consisting of one supply and one return line
- Glycol tubing material: Polyethylene (PE)
- Glycol tubing inside diameter: 3/8" (9.5 mm)
- Glycol tubing outside diameter: 1/2" (12.7 mm)
- Glycol line identification: Blue supply and red return
- Insulation thickness: 3/4" (19 mm)
- Internal wrap: Polythene film and aluminized polypropylene film
- Outer jacket: Black PVC tape
- Diameter of tubing cluster and insulation: 80–85 mm
- Weight per foot: 0.21 kg for the 5/16" version; 0.22 kg for the 3/8" version
- Product line identification: Colour stripes and numbered markings
- Brand: UBC Group
- Application: Commercial glycol-cooled beer, wine and soft drink dispensing systems
Selecting the Right Trunk Line
Choose this Duoflex configuration when the installation requires eight beverage lines with barrier tubing. Select the product tube diameter according to the beverage, route length, vertical rise, desired flow rate and operating pressure. Both versions use the same 3/8" I.D. glycol tubing.
Use our glycol chiller sizing calculator to estimate the cooling load, then review our glycol chillers when selecting equipment. You can compare other beer trunk lines if your system needs a different product count or tubing construction.
For soda projects, browse our beverage system parts for connection components and our carbonators and fountain dispensers for dispensing equipment. Follow a cleaning schedule appropriate for the beverages being served.
Important Note for US Customers Ordering Trunk Line Shipped from Canada
Trunk lines longer than 20-30 ft may require palletized shipping. Longer cuts of thinner trunk line may fit in standard boxes, but this depends on the trunk line diameter and finished coil size.
For shipments requiring customs clearance, the carrier or customs broker may request a business tax ID number. If your importer information is not already on file, you may also be asked to provide a CBP Form 5106 and supporting identification.
Please note: this trunk line is sold by the foot, with a 10-ft minimum purchase (1 ft = 0.3048 m). It is cut to order and non-returnable. Select the required beverage tubing diameter and enter the total length in feet when ordering.
For help selecting your trunk line or requesting a shipping quote, email our team at sales@beveragecraft.com with your required tubing size, length and full shipping address. Ships from Canada.