Beer Bottling Equipment

The final stage of brewing your beer at home is bottling. Although it may seem rather straightforward and simple, beer bottling and filling has to be done right if you want to get quality beer in the end.

Aside from your homebrewing skills and unique recipes, there’s one factor greatly contributing to the quality of the final product - and that is beer bottling equipment. You definitely want to get the equipment that’s right for your purposes and fits your particular homebrew system setup.

Beverage Craft gives you just that - top-quality small-scale beer bottle filling equipment for any homebrewer’s needs available from our website. Siphons, spigots, bottle cappers, bottle fillers - you name it, we’ve got it.

If you are not sure which piece of craft beer bottling equipment is right for you, let Beverage Craft specialists step in and help you make the right choice. Contact our team via live chat, email or phone - we’ll be there in an instant to provide you with professional consult and assistance.

Also, feel free to check out our bestsellers under the Brewing equipment category: glycol chillers and stainless steel tanks for craft breweries

Manual Beer Bottling Equipment: How It Works

When you’ve finally got to that last stage of the homebrewing process, you should have your siphon ready to go in your bottling bucket. The beer’s already primed, and what you need is just get it into the bottles.

A typical bottling process goes like this:

  1. Sanitize your bottle filler and attach it to the hose by running it directly into the hose. Bottle fillers are spring-loaded so it won’t start filling until you push down on it
  2. Grab an empty beer bottle, place it on the floor and put the bottle filler right into it
  3. Open the clip on the bottle filler so that the beer could flow until it fills up the bottle. You should leave about an inch of headspace at the top of the bottle when pulling out that bottle filler. Overfilling the bottle leads to the insufficient amount of carbonation. Underfilling, on the other hand, will lead to too much carbonation
  4. Take a pre-sanitized beer bottle cap and place it on top of the bottle. Then, take a bottle capper, stick it on the top as well, and then push down on it to safely seal the bottle. Done!
  5. Repeat the whole process (steps 1 through 4) until you’re out of beer

However, that’s not the end of the brewing itself. Now that you’ve got your beer bottled, you have to wait for 2-3 weeks for it to carbonate. After that, you can enjoy your own homebrewed beer!

The home beer bottling equipment we used here is a siphon, bottle filler, and a capper. In addition to that, we also have bottling spigots of ⅜’’ nozzle and 5/16-3/8'’ nozzle.

If you’re looking for a particular type of home brewing equipment and haven’t found it on our website, please write to us at to inquire about availability. We have new arrivals every week and are always here to help.