Taped Jacket Trunk Line - 4 Product / 2 Glycol - BevEx - Ships from Canada

1915
Was:
$7.99 7.99
SKU:
TRT1446
Minimum Purchase:
10 feet
Shipping:
Calculated at Checkout
Available In:
Canada
Product Lines:
4
Inside Diameter:
3/8
Inside Diameter:
5/16
Type:
Taped Jacket

icon-pdf.png Specifications (TRT1446)

icon-pdf.png Specifications (TRT1441)

The taped jacket 4-product beer trunk line is designed for glycol-cooled beer and soft drink dispensing systems in bars, restaurants and other commercial venues. It contains four polyethylene (PE) beverage tubes, available with either a 5/16" or 3/8" inside diameter, and two 3/8" I.D. polyethylene (PE) glycol tubes within one insulated bundle.

The beverage tubes carry four separate products from refrigerated storage to the dispensing system. Chilled glycol circulates alongside them to help maintain temperature along the route, while the smooth beverage tube surface helps limit deposit buildup alongside regular cleaning.

Built for Four-Product Dispensing Systems

Four independent beverage lines accommodate a varied drink selection without routing each line separately through the building. Colour stripes and numbered markings help technicians identify the correct tube when making connections, cleaning individual lines or servicing the system.

The two glycol tubes provide a supply and return path for the cooling circuit. The blue tube carries chilled glycol from the power pack toward the dispensing point, and the red tube returns it to the power pack for cooling.

Insulation and Taped Jacket

A 3/4" (19 mm) insulation layer helps reduce heat gain outside the refrigerated storage area. Polythene film and aluminized polypropylene film surround the internal assembly, while a black PVC tape jacket covers and protects the insulated bundle.

Connections and exposed tubing at both ends also need to be insulated and sealed to help maintain cooling and control condensation. Support the trunk line along its route without crushing the insulation or kinking the tubes.

Key Benefits

  • Four independent beverage lines: Accommodate four products within one insulated trunk line.
  • Two beverage tubing sizes: Choose 5/16" or 3/8" I.D. to suit your system design.
  • Smooth PE beverage tubing: Helps limit deposit buildup alongside regular cleaning.
  • Two glycol circulation lines: Carry chilled coolant to the dispensing point and back to the power pack.
  • 19 mm insulation: Helps limit heat gain along the run.
  • Clearly identified beverage tubes: Colour stripes and numbered markings simplify installation and maintenance.
  • Black PVC tape jacket: Covers and protects the insulated assembly.

Specifications

  • Product lines: 4
  • Product tubing material: Polyethylene (PE)
  • Product tubing size options: 5/16" I.D. × 7/16" O.D. (7.95 × 11.1 mm) or 3/8" I.D. × 1/2" O.D. (9.5 × 12.7 mm)
  • Glycol lines: 2, consisting of one supply and one return line
  • Glycol tubing material: Polyethylene (PE)
  • Glycol tubing inside diameter: 3/8" (9.5 mm)
  • Glycol tubing outside diameter: 1/2" (12.7 mm)
  • Glycol line identification: Blue supply and red return
  • Insulation thickness: 3/4" (19 mm)
  • Internal wrap: Polythene film and aluminized polypropylene film
  • Outer jacket: Black PVC tape
  • Product line identification: Colour stripes and numbered markings
  • Brand: UBC Group
  • Application: Commercial glycol-cooled beer and soft drink dispensing systems

Selecting the Right Trunk Line

Select the beverage tubing diameter before ordering. The 5/16" and 3/8" options have different flow resistance, so the choice should account for the beverage being served, run length, vertical lift, required flow rate and operating pressure. Both configurations use 3/8" I.D. glycol tubing.

Use our glycol chiller sizing calculator to estimate your system’s cooling requirements, or explore our glycol chillers when planning your installation. Compare other beer trunk lines if you need a different configuration.

For soda installations, browse our beverage system parts for connection components or explore our carbonators and fountain dispensers.

Important Note for US Customers Ordering Trunk Line Shipped from Canada

Trunk lines longer than 20-30 ft may require palletized shipping. Longer cuts of thinner trunk line may fit in standard boxes, but this depends on the trunk diameter and finished coil size.

For shipments requiring customs clearance, the carrier or customs broker may request a business tax ID number. If your importer information is not already on file, you may also be asked to provide a CBP Form 5106 and supporting identification.

Please note: this trunk line is sold by the foot, with a 10-ft minimum purchase (1 ft = 0.3048 m). It is cut to order and non-returnable. Select the required beverage tubing diameter and enter the total length in feet when ordering.

For help selecting your trunk line or requesting a shipping quote, email our team at sales@beveragecraft.com with your required tubing size, length and full shipping address. Ships from Canada.