This 16-product draft beer trunk line from BeverageCraft features 3/8" or 5/16" inner diameter beer lines wrapped in an extruded PVC jacket for durability and moisture resistance. It is designed for commercial long-draw glycol dispensing systems in bars, restaurants and taprooms.
To help control condensation, the beer trunk line is fitted with 3/4" (19 mm) insulation, food-grade polythene cling wrap and aluminized polypropylene film. The PE Ultra polyethylene beverage tubes carry beer and soft drinks, while four glycol lines circulate coolant alongside them to help maintain beverage temperature.
Color-coding and numbering of the beer lines help to keep the products organized and make individual lines easier to identify during installation, cleaning and service.
Built for Multi-Product Draft Systems
With sixteen separate beverage lines, this trunk line accommodates a varied selection of draft beer and soft drinks. Each product has its own tube from the walk-in cooler to its assigned faucet, with all sixteen lines following the same installation route.
Four 3/8" I.D. polyethylene glycol tubes provide two supply and two return paths. The blue tubes carry chilled glycol towards the dispensing point and the red tubes return it to the power pack for cooling.
Insulation and Extruded Jacket
The 19 mm insulation layer helps reduce heat gain as the trunk line passes through areas outside the walk-in cooler. Polythene cling wrap and aluminized polypropylene film surround the tubing assembly, and a black extruded PVC jacket protects the outside of the bundle.
Connections and exposed tubing at both ends also need to be insulated and sealed. Support the trunk line along its route and allow enough room at bends to avoid kinking the tubes or compressing the insulation.
Key Benefits
- Sixteen independent beverage lines: Accommodate a wide selection of draft beer and soft drinks.
- PE Ultra polyethylene tubing: Suitable for commercial beer and soft drink dispensing.
- Two beverage tubing sizes: Choose 5/16" or 3/8" I.D. to suit the system’s pressure and flow requirements.
- Four glycol circulation lines: Two supply and two return tubes carry coolant alongside the beverage lines.
- 19 mm insulation: Helps limit heat gain between the walk-in cooler and the taps.
- Extruded PVC jacket: Provides a protective exterior around the insulated assembly.
- Colour stripes and numbers 1-16: Help technicians trace individual beverage lines during installation and service.
Specifications
- Product lines: 16
- Product tubing type: PE Ultra
- Product tubing material: Polyethylene (PE)
- Product tubing size options: 5/16" I.D. × 7/16" O.D. (7.95 × 11.1 mm) or 3/8" I.D. × 1/2" O.D. (9.5 × 12.7 mm)
- Glycol lines: 4, consisting of two supply and two return lines
- Glycol tubing material: Polyethylene (PE)
- Glycol tubing inside diameter: 3/8" (9.5 mm)
- Glycol tubing outside diameter: 1/2" (12.7 mm)
- Glycol line identification: Blue supply and red return
- Insulation thickness: 3/4" (19 mm)
- Internal wrap: Food-grade polythene cling wrap and aluminized polypropylene film
- Outer jacket: Black extruded PVC
- Product line identification: Colour stripes and numbers 1-16
- Brand: UBC Group
- Application: Commercial long-draw glycol-cooled beer and soft drink dispensing systems
Selecting the Right Trunk Line
Select the beverage tubing diameter as part of the draft system’s pressure and flow calculations. The 5/16" tubing provides more flow resistance than the 3/8" option, so consider the total run length, vertical rise, beverage and required flow rate before ordering. The glycol tubing remains 3/8" I.D. with either beverage line size.
Use our glycol chiller sizing calculator to estimate the cooling load, then compare our glycol chillers. Browse our beer trunk lines if your installation requires a different number of product lines.
For soft drink installations, browse our beverage system parts for connection components, or explore our carbonators and fountain dispensers when planning the complete system.
Please note: this trunk line is sold by the foot, with a 10-ft minimum purchase (1 ft = 0.3048 m). It is cut to order and non-returnable. Select the required beverage tubing diameter and enter the total length in feet when ordering.
For help selecting your trunk line or requesting a shipping quote, email our team at sales@beveragecraft.com with your beverage tubing size, required length and full shipping address. Ships from USA.