ATTENTION: THIS ITEM IS ONLY AVAILABLE IN CANADA
ChemSan is a self-foaming, no-rinse sanitizer for craft and homebrewing equipment. A blend of phosphoric acid, benzenesulfonic acid and isopropanol - works fast, leaves no taste or odor, and doesn't need rinsing at the recommended dilution. One 250ml bottle makes up to 25 x 5-litre solutions. A direct alternative to StarSan.
Not recommended for use on soft metals due to the acid nature of this product. Do not mix with chlorinated cleaners*
- Self-foaming formula penetrates cracks and hard-to-reach surfaces
- No rinse required at 0.2% dilution (10ml per 5 litres of water)
- Not affected by organic soils
- Minimum contact time 2 minutes
- Solution remains active at pH 3 or below - reusable, check pH regularly
- Not recommended on soft metals
How to Use
Clean all surfaces first with a suitable detergent and rinse with water. Mix 10ml of ChemSan into 5 litres of tap water (0.2% dilution). Apply by immersion, spray, cloth, mop or brush. Leave for a minimum of 2 minutes. Drain - do not rinse. Higher concentrations require a potable water rinse.
Works With
Use ChemSan as part of a full beer line cleaning routine alongside your draft beer parts and keg couplers. See our full range of line cleaning equipment and chemicals.
Ships only across Canada*
Related Products
