Production floors that get hosed down between brew days need equipment that can handle that, which is why this glycol chiller, the BrewChill Pro 13000SS-2, comes in a stainless steel housing instead of the standard cabinet. Underneath, it runs the same 13,000 BTU system as the rest of the lineup: two pumps on two separate thermostats, an 18 gallon reservoir, and glycol lines rated up to 750 feet, all on 208 to 230 volt power. Because each pump holds its own setpoint, one tank can run fermentation hold while another sits at a different cold crash temperature at the same time, and fermenters or bright tanks up to 2,000 liters stay steady through long, continuous brew cycles.
It's the model most US breweries choose once sanitation standards or a licensing inspection call for stainless equipment on the cooling side and the same durability holds up in wineries and cideries with similar wash down routines.
Key Features:
- 13,000 BTU/h cooling capacity: Built for medium-batch USA breweries, this commercial glycol chiller holds consistent temperatures in fermentation tanks up to 2,000 L through long brew sessions.
- Dual-zone operation standard: Two built-in 80 gal/hr vane pumps, each on its own 1/3 HP motor, run independent temperature control for multiple fermenters or serving tanks at once.
- Energy-efficient performance: Two 1 HP compressors on eco-friendly R290 refrigerant deliver strong wort cooling and fermentation temperature control while keeping energy use down.
- Stainless steel build: The stainless housing and efficient internal layout keep this brewery equipment running quietly, even in tight brewing spaces.
- Pre-assembled for fast setup: Ships with external digital thermostats, solenoid valves, and standard 3/4" NPT inlets/outlets for quick integration with existing glycol lines.
- Extended line reach: Supports glycol runs up to 750 ft, giving flexibility for multi-tank configurations and remote cooling zones.
- Built for continuous operation: An 18-gallon glycol reservoir and industrial-grade components keep this chiller performing reliably batch after batch.
Parts Included:
- 1 × Glycol chiller with an 80 gal/hr recirculation pump, 1/3 hp motor
- 1 × External Digital Thermostat
- 4 × Solenoid Valves
BrewChill Pro 13000SS - USA |
|
| MODEL | BC-13000SS-2-ASM |
| MAXIMUM DISTANCE | Up to 750 ft |
| CAPACITY | 13000 BTU/H |
| GLYCOL TANK CAPACITY | 18 gallons |
| COMPRESSOR POWER | 1+1HP |
| RUNNING | With 1 pump - 12.7 AMP With 2 pimps - 15.5 AMP |
| PLUG TYPE (NEMA #) | 6-20P |
| VOLTAGE | 208/230 V |
| FREQUENCY | 60 HZ |
| PUMP TYPE | Vane with 1/3hp motor |
| PUMP | 80 GPH |
| NUMBER OF PRE-INSTALLED PUMPS | 2 |
| NUMBER OF ADDITIONAL PUMPS | 0 |
| REFRIGERANT | R290 |
| REFRIGERANT CHARGE, G (OZ) | 150 (5.29)+150 (5.29) |
| WEIGHT GROSS/NET | 238 / 231 lb |
| POWER CORD LENGTH | 6 ft |
| INLET/OUTLET BARB, IN | red tube 3/4” NPT / blue tube 3/4” NPT |
| OPERATING AMBIENT TEMPERATURE | 60-90 F |
| CLEARANCE AT LEAST | 12" around the entire unit |
| GLYCOL MIXTURE, VOL% | 40 % glycol and 60% water |
Note: Installation of this item must be handled by a qualified installer in order to qualify for product return and/or warranty coverage. Qualified Installer - Defined as a licensed professional who charges a fee for his services, and possesses a business license, contractor's license, and/or resale permit. Common examples of a "qualified installer" include Electrician; General Contractor; Heating and Air Conditioning Specialist.
Our brewery chiller sizing calculator can confirm 13,000 BTU and 750 foot glycol lines match your production floor before you order. If stainless construction is not a requirement for your space, the standard cabinet BrewChill Pro 7500-2 is worth comparing for smaller tank counts. Not sure which cabinet your facility needs? Contact us and our team will help you decide.
Related Products
