Running a soda gun, beer tower, or any setup with more than a couple of lines means keeping a lot of tubing organized and protected on the way from the cooler to the dispense point. This Bev-Seal Ultra bundle groups 12 individual barrier lines, 8 runs of 1/4" and 4 runs of 3/8", inside one jacket, so you pull one bundle instead of wrestling a dozen loose lines into place. It's not built for one specific machine, it works equally well as trunk line for a soda fountain setup or as the beer lines feeding a multi-tap kegerator.
Each line inside the bundle is genuine Bev-Seal Ultra tubing, built with a dual barrier inner liner instead of plain vinyl or polyethylene. That barrier layer stops flavor and odor from migrating between lines and keeps oxygen from working its way in, so a root beer line sitting next to a cola line won't pick up cross flavors over time. The whole bundle comes wrapped in a silver-grey outer jacket, sold by the foot off a 100 foot roll, with a 10 foot minimum order.
Bev-Seal Ultra Bundle Features
- 12 lines total per bundle: 8 lines of 1/4" ID tubing plus 4 lines of 3/8" ID tubing
- Dual barrier inner liner prevents flavor transfer and oxygen ingress
- NSF-51 and NSF-61 certified, FDA compliant for beverage contact
- Rated to 150 PSI at 70°F
- Works with push-fit, compression, or barbed fittings
- Overall bundle diameter of 2.0", off a 100 foot roll, sold by the foot with a 10 foot minimum order
- Each individual line is color-coded, numbered, and marked with its NSF information for easy identification
- Outer jacket is date-coded for traceability and printed with sequential footage markings, so you can track exactly how much you've installed
- Flexible film wrap under the jacket allows tighter bends and easier routing, and a slip agent on the outer jacket cuts friction while you're pulling it into place
Building Out Your Line Run
Need barb fittings to finish the ends? Our 1/4" FFL Swivel Nut x 3/8" Barb fits the 3/8" lines in this bundle, and our Ball Lock Gas Quick Disconnect works with the 1/4" lines on the keg side. Setting this up for soda? Take a look at our carbonators and fountain dispensers. Running beer instead, off more than one tap? Browse our commercial kegerators. Either way, the rest of our beverage system parts covers everything else your setup needs.
Not sure how many feet to order for your run, or whether this bundle covers all the lines you need? Let us know your setup and we'll help you figure out the count.
For this bundle or anything else we carry, reach us at sales@beveragecraft.com.
Related Products
