Extruded Trunk Line - 2 Product / 2 Glycol - BevEx - Ships from USA

2073
Was:
$8.99 8.99
SKU:
TRE1445
Minimum Purchase:
10 feet
Shipping:
Calculated at Checkout
Available In:
USA
Product Lines:
2
Inside Diameter:
3/8
Inside Diameter:
5/16
Type:
Extruded

icon-pdf.png Specifications (TRE1445)

icon-pdf.png Specifications (TRE1440)

The extruded 2-product trunk line is designed for glycol-cooled beer and soft drink dispensing systems in bars, restaurants and other commercial venues. It contains two polyethylene (PE) beverage tubes, available with either a 5/16" or 3/8" inside diameter, and two 3/8" I.D. polyethylene (PE) glycol tubes within one insulated bundle.

The beverage tubes carry drinks from refrigerated storage to the dispensing system, while chilled glycol circulates alongside them to help maintain temperature along the route. The ultra-smooth beverage tube surface helps reduce the adhesion of bacteria and yeast and limit deposit buildup alongside regular cleaning.

Built for Beer and Soft Drink Dispensing Systems

Two independent beverage lines accommodate two products within one insulated trunk line. Colour stripes and numbered markings help technicians trace each product line when making connections, cleaning the system or servicing the installation.

The glycol circuit consists of one blue supply tube and one red return tube. These carry chilled coolant from the power pack through the trunk line and back, helping remove heat gained along the dispensing route.

Insulation and Extruded Jacket

A 3/4" (19 mm) insulation layer helps reduce heat gain between refrigerated storage and the dispensing point. Polythene film and aluminized polypropylene film surround the internal assembly, while a black extruded PVC jacket covers and protects the insulated bundle.

Connections and exposed tubing at both ends also need to be insulated and sealed to help maintain cooling and control condensation. Support the trunk line along its route without crushing the insulation or kinking the tubes.

Key Benefits

  • Two independent beverage lines: Accommodate two products within one insulated trunk line.
  • For beer and soft drinks: Suitable for commercial glycol-cooled beverage dispensing installations.
  • Two product tubing sizes: Choose 5/16" or 3/8" I.D. to suit your system design.
  • Ultra-smooth beverage tubing: Helps reduce the adhesion of bacteria and yeast and limit beer stone buildup in beer applications.
  • Two glycol circulation lines: Provide a supply and return path for chilled coolant.
  • 19 mm insulation: Helps limit heat gain along the run.
  • Extruded PVC jacket: Covers and protects the insulated assembly.
  • Clearly identified beverage tubes: Colour stripes and numbered markings simplify line tracing during installation and maintenance.

Specifications

  • Product lines: 2
  • Product tubing material: Polyethylene (PE)
  • Product tubing size options: 5/16" I.D. × 7/16" O.D. (7.95 × 11.1 mm), or 3/8" I.D. × 1/2" O.D. (9.5 × 12.7 mm)
  • Glycol lines: 2, consisting of one supply and one return line
  • Glycol tubing material: Polyethylene (PE)
  • Glycol tubing inside diameter: 3/8" (9.5 mm)
  • Glycol tubing outside diameter: 1/2" (12.7 mm)
  • Glycol line identification: Blue supply and red return
  • Insulation thickness: 3/4" (19 mm)
  • Internal wrap: Polythene film and aluminized polypropylene film
  • Outer jacket: Black extruded PVC
  • Product line identification: Colour stripes and numbered markings
  • Brand: UBC Group
  • Application: Commercial glycol-cooled beer and soft drink dispensing systems

Selecting the Right Trunk Line

Select the beverage tubing diameter before ordering. The 5/16" and 3/8" options have different flow resistance, so the choice should account for the beverage being served, run length, vertical lift, required flow rate and operating pressure. The glycol tubing remains 3/8" I.D. in both configurations.

Use our glycol chiller sizing calculator to estimate your system’s cooling requirements, or explore our glycol chillers when planning your installation. Compare other trunk lines if you need a different configuration.

Browse our beverage system parts for connection components, or explore our carbonators and fountain dispensers when planning a soda installation.

Please note: this trunk line is sold by the foot, with a 10-ft minimum purchase (1 ft = 0.3048 m). It is cut to order and non-returnable. Select the required beverage tubing diameter and enter the total length in feet when ordering.

For help selecting your trunk line or requesting a shipping quote, email our team at sales@beveragecraft.com with your required tubing size, length and full shipping address. Ships from USA.