The QuickPro 3200G glycol chiller provides 3,200 BTU/h of cooling capacity for long-draw draft beer systems with runs up to 125 ft. It circulates a chilled mixture of water and food-grade propylene glycol through the glycol lines in an insulated trunkline, helping keep beer cold between the keg cooler and the tap. This model is available for purchase in Canada only.
For a bar, pub or restaurant with a separate keg cooler, this compact glycol chiller keeps beer lines cold without taking up much floor space. A digital thermostat controls the glycol temperature, while a vane pump with a 1/3 hp motor circulates the mixture through the cooling loop. Allow at least 12 inches of clearance around the entire unit for ventilation and keep the installation area within the specified ambient temperature range.
Use it with a suitable beer trunkline, a glycol-cooled draft beer tower and the required draft beer parts. The maximum run depends on the trunkline configuration, insulation, ambient conditions and total cooling load. Use our glycol chiller sizing calculator to estimate your cooling requirements, or contact our team to review your layout before ordering.
QuickPro 3200G - 3200 BTUs - Canada Only |
|
| Maximum Distance - ft | 125 |
| BTU Capacity - BTU/H | 3200 |
| Dimensions - WxDxH - in | 16.4x16.2x27.4 |
| Weight - Gross/Net - lb | 110/105 |
| Glycol Tank Capacity - Gal | 2 |
| Compressor Power - HP | 3/8 |
| Plug Type - NEMA# | 5-15P |
| Amperage - A | 11.7 |
| Voltage - V | 115 |
| Frequency - Hz | 60 |
| Pump - Type | Vane, 1/3 hp motor |
| Pump Flow Rate - GP/H | 80 |
| Preinstalled Pumps | 1 |
| Additional Pumps | 0 |
| Refrigerant | R290 |
| Refrigerant Charge - G (Oz) | 150 (5.29) |
| Power Cord Length - ft | 6 |
| Inlet / Outlet Barb - in | 3/8 |
| Operating Ambient Temperature - °F | 60-90 |
| Recommended Clearance around Unit - in | 12 |
| Recommended Glycol Mixture - Glycol / Water | 40/60 |
Related Products
