The ChillPro 13000 Water-Cooled uses a coaxial heat exchanger and water regulating valve instead of a standard air-cooled condenser, cutting down on the heat and airflow a typical unit would put into the room. It's built for breweries, distilleries, and large beverage operations running long trunkline distances.
You can pick between two configurations at checkout: 2 vane pumps with room to add 2 more later or 4 vane pumps pre installed and ready to go from day one. Either way, two 1 hp compressors and a digital thermostat keep the glycol at temperature across the full 750 ft trunkline range.
Runs with standard trunkline and works alongside your draft beer parts and brewery equipment. Not sure which pump configuration fits your setup? Our glycol chiller sizing calculator can help you decide before you order.
ChillPro 13000 - 13000 BTUs - Water Cooled - USA Only |
|
| Maximum Distance - ft | 750 |
| BTU Capacity - BTU/H | 13000 |
| Dimensions - WxDxH - in | 28x23x31 |
| Weight - Gross/Net - lb | 238/232 |
| Glycol Tank Capacity - Gal | 18 |
| Compressor Power - HP | 2 (1+1) |
| Plug Type - NEMA# | HardWire or 6-20P |
| Amperage - A |
1 Pump: 12.2 / 2 Pumps: 15.0 |
| Voltage - V | 208/230 |
| Frequency - Hz | 60 |
| Pump - Type | Rotary Vane |
| Pump Flow Rate - GP/H | 80 |
| Preinstalled Pumps | 2-4 |
| Additional Pumps | 2-0 |
| Refrigerant | R290 |
| Refrigerant Charge - G (Oz) | 150 (5.29) + 150 (5.29) |
| Power Cord Length - ft | 6 |
| Inlet / Outlet Barb - in | 3/8 |
| Water Inlet / Outlet Barb - in | 3/8-18 NPT |
| Inlet Water Pressure - PSI | 40-150 |
| Flow Rate Minimum - GPM | 2.0 |
| Operating Ambient Temperature - °F | 60-90 |
| Recommended Clearance around Unit - in | 12 |
| Recommended Glycol Mixture - Glycol / Water | 40/60 |
Note: Installation of this item must be handled by a qualified installer in order to qualify for product return and/or warranty coverage. Qualified Installer - Defined as a licensed professional who charges a fee for his services and possesses a business license, contractor's license and/or resale permit. Common examples of a "qualified installer" include Electrician; General Contractor; Heating and Air Conditioning Specialist.
Related Products
