Once a Canadian brewery moves past pilot scale, cooling needs change. Bigger tanks, longer brew days, less room for a chiller that can't keep up. The BrewChill Pro 7500-2 is built for that stage. It ships with two 80 gal/hr vane pumps installed from the factory, both running off the same thermostat, so you get one setpoint across multiple tanks rather than independent zones. If you need two tanks at different temperatures at the same time, the 13000-2 is the better fit, it runs two separate thermostats.
At 7,500 BTU/h, it handles wort chilling and fermentation temperature control, with a 1 HP compressor on R290 refrigerant to keep running costs down. Built to run continuously through demanding brew cycles.
Key Features of BrewChill Pro 7500-2 Glycol Chiller
- Two pumps, one setpoint: Two built-in 80 gal/hr vane pumps on separate 1/3 HP motors. Both share the same thermostat, so it's one setpoint, not independent zones.
- 7,500 BTU/h capacity: Rated for fermentation tanks up to 1,500 liters, built for medium-batch Canadian breweries.
- Efficient at scale: A 1 HP compressor on R290 refrigerant, strong cooling without a big jump in power costs.
- Commercial-grade reliability: Suited to microbreweries, brewpubs and advanced homebrewers who need consistent performance under demanding use.
- Quick to install: 3/4" NPT fittings, 6-ft power cord, NEMA 6-20P plug for fast setup in new or existing Canadian systems.
- 450-ft line reach: Flexible placement across larger brewing facilities.
- Built for long runs: Designed to hold steady cooling through extended, high-demand brewing sessions.
Parts Included:
- 1 × BrewChill Pro 7500 (80 GPH pump, 1/3 HP motor)
- 1 × External digital thermostat
- 4 × Solenoid valves
BrewChill Pro 7500 - Canada |
|
| MODEL | BC-7500-2 |
| MAXIMUM DISTANCE | Up to 450 ft |
| CAPACITY | 7500 BTU/H |
| GLYCOL TANK CAPACITY | 18 gallons |
| COMPRESSOR POWER | 1/2 HP |
| RUNNING | With 1 pump - 10.0 AMP With 2 pimps - 12.8 AMP |
| PLUG TYPE (NEMA #) | 6-20P |
| VOLTAGE | 208/230 V |
| FREQUENCY | 60 HZ |
| PUMP TYPE | Vane with 1/3hp motor |
| PUMP | 80 GPH |
| NUMBER OF PRE-INSTALLED PUMPS | 2 |
| NUMBER OF ADDITIONAL PUMPS | 1 |
| REFRIGERANT | R290 |
| REFRIGERANT CHARGE, G (OZ) | 150 (5.29) |
| WEIGHT GROSS/NET | 154 / 147 lb |
| POWER CORD LENGTH | 6 ft |
| INLET/OUTLET BARB, IN | red tube 3/4” NPT / blue tube 3/4” NPT |
| OPERATING AMBIENT TEMPERATURE | 60-90 F |
| CLEARANCE AT LEAST | 12" around the entire unit |
| GLYCOL MIXTURE, VOL% | 40 % glycol and 60% water |
Note: Installation of this item must be handled by a qualified installer in order to qualify for product return and/or warranty coverage. Qualified Installer - Defined as a licensed professional who charges a fee for his services, and possesses a business license, contractor's license, and/or resale permit. Common examples of a "qualified installer" include Electrician; General Contractor; Heating and Air Conditioning Specialist.
Not sure which BrewChill Pro size is right for your setup? Our Brewery Glycol Chiller Sizing Calculator walks through your tanks and process to point you at the right capacity.
Have questions about sizing, specs or anything else? Reach out to the BeverageCraft team by live chat, email or phone. We'll help you find the right fit.
Related Products
Glycol Chiller - ChillPro 13000SS - 13000 BTUs - Canada Only
