Nano breweries and pilot systems in the US often run into the same wall: not enough floor space for a full glycol system, but not enough control from a swamp cooler either. The BrewChill Pro 3200-1-GP solves that with a self-contained 3,200 BTU glycol chiller that fits in a tight corner and still delivers commercial-grade cooling from a 6.3 gallon reservoir mixed to about 40 percent glycol and 60 percent water. Inside, a vane pump moves chilled glycol from the reservoir out to your tank's cooling jacket, and an automatic thermostat keeps the temperature where you set it around the clock.
The unit handles fermentation tanks up to 200 liters, which covers most pilot batches and early-stage nano brewery setups. And because the cooling process itself doesn't care what's fermenting, this same chiller shows up just as often at small wineries and cideries that need dependable temperature control without a full walk-in cooler.
Key Features:
- 3,200 BTU/h cooling capacity: Enough cooling power for fermentation tanks up to 200L in a compact footprint - ideal for pilot-scale breweries and advanced homebrew setups that need commercial-grade temperature control.
- Single zone vane pump: Ships standard with one 80 gal/hr vane pump (1/3 HP motor) This model runs a single cooling zone and does not support adding a second pump.
- Low energy use, low noise: A 3/8 HP compressor running eco-friendly R290 refrigerant keeps power draw and operating noise down without sacrificing performance.
- Small footprint, built to last: Compact enough for tight brewery corners or home setups, with industrial-grade components for long-term reliability.
- Plug-and-play U.S. setup: Arrives with 3/4" NPT inlet/outlet barbs, a 6 ft power cord, and a standard NEMA 5-15P plug - no adapters or rewiring needed for U.S. outlets.
- Long line reach: Glycol lines can run up to 250 ft, giving you flexibility in where you place the chiller relative to your tanks.
- Steady performance under load: A 6.3-gallon glycol tank paired with the vane pump keeps temperatures stable through long brew days and back-to-back batches.
Parts Included:
- 1 × BrewChill Pro 3200-3/8-GP glycol chiller with 80 gal/hr recirculation pump (1/3 HP motor)
- 1 × External Digital Thermostat
- 2 × Solenoid Valves
BrewChill Pro 3200H - USA |
|
| MODEL | BC-3200-1-GP-ASM-USA |
| MAXIMUM DISTANCE | Up to 125 ft |
| CAPACITY | 3200 BTU/H |
| GLYCOL TANK CAPACITY | 6.3 gallons |
| COMPRESSOR POWER | 3/8 HP |
| RUNNING | 13.3 AMP |
| PLUG TYPE (NEMA #) | 5-15P |
| VOLTAGE | 115 V |
| FREQUENCY | 60 HZ |
| PUMP TYPE | Vane with 1/3hp motor |
| PUMP | 80 GPH |
| NUMBER OF PRE-INSTALLED PUMPS | 1 |
| NUMBER OF ADDITIONAL PUMPS | 0 |
| REFRIGERANT | R290 |
| REFRIGERANT CHARGE, G (OZ) | 120 (4.23) Secop / 80 (2.82) Cubigel |
| WEIGHT GROSS/NET | 80 / 76 lb |
| POWER CORD LENGTH | 6 ft |
| INLET/OUTLET BARB, IN | red tube 3/4” NPT / blue tube 3/4” NPT |
| OPERATING AMBIENT TEMPERATURE | 60-90 F |
| CLEARANCE AT LEAST | 12" around the entire unit |
| GLYCOL MIXTURE, VOL% | 40 % glycol and 60% water |
Note: Installation of this item must be handled by a qualified installer in order to qualify for product return and/or warranty coverage. Qualified Installer - Defined as a licensed professional who charges a fee for his services and possesses a business license, contractor's license, and/or resale permit. Common examples of a "qualified installer" include Electrician; General Contractor; Heating and Air Conditioning Specialist.
Run your tank dimensions through our brewery chiller sizing calculator to confirm 3,200 BTU covers your setup before you order. Nano breweries that outgrow this size within the first year usually move up to the BrewChill Pro 4000-1, which adds more reservoir capacity and cooling power. Not sure which one fits your timeline? Contact us and our team will help you plan ahead.
Related Products
