McDantim Gas Blender - Trumix 100 - 70N2/30CO2 - Refurbished

Description

McDantim Tier 3 – Full Panel Refurbished Gas Blender

McDantim Tier 3 Full Panel Refurbished gas blenders are factory-refurbished units restored to current performance standards and ready for reliable long-term service. This comprehensive refurbishment combines both Tier 2A (blending assembly rebuild) and Tier 2B (panel assembly refurbishment), ensuring the entire unit is fully inspected, rebuilt, recalibrated, and tested by McDantim technicians.

Each Tier 3 refurbished blender is set up to the exact gas blend required for your application and undergoes complete functional and leak testing before shipment. Critical internal components are replaced as needed, the panel is updated to current specifications, and the unit is tuned to deliver accurate, consistent gas blending performance.

Every Tier 3 refurbished McDantim blender includes a new 2-year factory warranty starting from the date of refurbishment, with the option to upgrade to an extended 3-year warranty for additional peace of mind. This makes Tier 3 refurbished units a cost-effective alternative to new equipment while maintaining factory support, reliability, and performance confidence.

Key benefits:

Full factory refurbishment (blending assembly + panel components)
Custom gas blend configuration to your specifications
Thorough inspection, testing, and recalibration
2-year McDantim factory warranty (year extended option available)
Reliable, like-new performance at a lower cost than new equipment

A McDantim gas blender is a very accurate and reliable device used primarily in the draught beer industry to mix gases onsite.

Instead of buying expensive, pre-mixed gas cylinders (like "beer gas"), a bar or brewery buys pure CO₂ and pure Nitrogen separately. The McDantim blender takes these two pure gases and mixes them in exact percentages (e.g., 70% CO₂ / 30% Nitrogen) in real-time as the beer is poured.

Why it matters:

Perfect Carbonation: It prevents beer from going flat or becoming over-carbonated (foamy) in long-draw systems.
Cost Savings: Pure gas is cheaper than pre-mixed cylinders.

Dimensions: 9.5″ W x 10″ H x 4.5″ D

Outlet Pressure: Adjustable outlet pressure of 0-60 psi per blend. Maximum outlet pressure will always be 10 psi lower than the minimum inlet pressure.

Blender’s Standard Flow Capacity:

At 55 psi minimum inlet pressure, up to 12 kegs/hour
At 70 psi minimum inlet pressure, up to 16 kegs/hour
At 110 psi minimum inlet pressure, up to 26 kegs/hour

Blender’s High Flow Capacity:

At 55 psi minimum inlet pressure, up to 20 kegs/hour
At 70 psi minimum inlet pressure, up to 26 kegs/hour
At 110 minimum inlet pressure, up to 48 kegs/hour

Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of 0.4 to 40 liters per minute (0.85 to 85 cfh.)

McDantim blenders mix CO₂ and N₂ on demand and are best used for long-draw draft systems. The Single blender comes preset with your custom blends to best fit your system. The panel mounts easily on the wall and is simple to install. With the Single blender, customization of the blends gives you endless options and the flexibility to expand your draft beer selection. You could include low-CO₂-content nitrogenated beers, high-CO₂-content German-style beers, and domestic drafts on one system without the need for additional premixed cylinders.

Features: