The Flojet G-56 (BeerJet) is a CO2-driven beer pump built for long draw draft systems, where the keg is too far from the tap for gravity or standard gas pressure alone. It starts and stops automatically as faucets open and close.
It runs on CO2, nitrogen or compressed filtered air, with an open flow rate of 5 GPM and an operating range of 10-90 PSI. The pump body uses polypropylene, Santoprene, EPDM and 304 stainless steel wetted parts.
Flojet G-56 Beer Pump Features
- Flow rate: 5 GPM (18.9 LPM), open flow
- Operating pressure: 10-90 PSI
- Power source: CO2, nitrogen, or compressed filtered air
- Connections: 3/8"-1/2" combo barb product inlet/outlet, 1/4" barb gas inlet/outlet
- Dimensions: 5.27" H x 3.21" W x 4.58" D
- Weight: 1.24 lbs
- Self-priming: up to 10 feet
- Installation: pump must sit within 10 feet, above or below, of the keg
Complete Your Long Draw Setup
This pump keeps running if it loses beer flow, so most installers pair it with a FOB (foam on beer) detector, like our Tecflo Smart FOB Detector, to shut it off automatically when the keg runs dry. On the gas side, our brass check valve fitting is a common gas inlet accessory for this pump. Browse the rest of our beverage system parts for everything else your setup needs.
Have questions about this or any other product? Reach out to us at sales@beveragecraft.com and we'll be happy to help. We add new products every week.
Related Products
