Draft Beer Equipment
Who doesn’t like draft beer? Brewing and/or dispensing quality craft beer at home always makes for a time well spent with friends or family. However, draft beer systems (much like people) need love too - mostly, in the form of regular maintenance and service.
For that, you’re going to need a wide range of spare parts for your home draft beer equipment, which is exactly what you’re getting from Beverage Craft, trusted craft beer equipment suppliers since 2014.
We offer a solid selection of parts and accessories for craft beer home brewing equipment, including various parts for corny kegs:
- Ball locks
- Carbonation caps
- Gas/liquid disconnects
- Keg lids
- CO2 regulators
- Assorted washers
If you are not sure which part is right for your homebrewing system setup, let BeverageCraft specialists step in and help you make the right choice. Contact our team via live chat, email or phone - we’ll be there in an instant to provide you with professional consult and assistance.
Craft Beer Equipment Overview
Although there is plenty of room for variation, most draft beer systems consist of the following elements:
- CO2 (or nitrogen) tank
- Gas regulator
- Air line
- Keg coupler
- Beer line
- Draft beer tower
- Faucet and tap handle
CO2 (or nitrogen, if you’re dispensing Guinness) is required to help push the beer out of the keg and also to maintain the proper carbonation levels of your draft beer.
Gas regulator is connected directly to the CO2 tank - it brings the gas pressure down to workable levels (usually between 10 and 15 PSI). Air line connects the regulator to the keg coupler - it is essentially a food-grade PVC tube.
The keg coupler is attached to the keg valve and takes in CO2 to push air through the keg and beer through the beer line. Beer line, much like air line, is a PVC food-grade tube - in a typical draft beer dispensing system, it screws onto the top of the coupler and connects to the shank or draft beer tower.
Shank is a threaded metal tube that runs either through your refrigerator or the top of your draft tower. One line features a female thread for the beer line, and the other is a male thread for the faucet.
Draft Beer Equipment from Beverage Craft
If you need replacement parts for any of these elements, you can find them on our website here on this page or in the “Accessories and Parts” section.
Looking for a particular type of craft beer making equipment and haven’t found it on our website? Please write to us at email@example.com to inquire about availability. We have new arrivals every week and are always here to help.